northwest Repairing a bad coil lead, at the coil end.
Welcome, Guest. Please login or register.
Wednesday October 18 2017 12:56:53 AEDT PM
Home Help Login Register
News: Welcome to the Australianelectronicgoldprospectingforum founded in July 2010, an add free totally independent forum with over 70 boards and paid for and managed by the Admin.Total forum Topics:8,797 Total forum Posts:42,096  Members:690 Total page views:9,008,584 Admin and  forum and domain name owner :marjen at optusnet.com.au. Guests can only see a limited number of boards at present and cannot see any links. Guest cannot post and never will be permitted too!Registration of new members must be approved by admin.Anyone known to have any past or present association with Codan/ML or acting on their behalf as a proxy or intermediary  will not have their registration approved. All  original Photos and posts and  original materials displayed on this site are COPYRIGHTED and remain the property of the poster and the  Austalian electronicgoldprospectingforum.com. All messages on this forum express the personal views of the author and should not be interpreted as necessarily being in accord with those of the forum owner and neither the owner of this forum and its domain name nor SMF or the forum software developers or the forum host shall be held responsible for the content of any message. Admin reserves the right to remove any offensive or objectionable posts. No defamatory material or politics/religion or issues of race will be permitted.

Some software and hardware updates now available for the QED.More  QED firmware updates (inc Auto GB  option) just announced here. New  QED hardware updates/options and pictures will be posted  first here  as they become available.

Another satisfied QED user! QED user report for 9 days detecting! User loves it, found it easy to use,found gold with it and he prefers it to his 5000! Also a report on a QED used at the beach for coin shooting.QED users reporting in with their multi ounce gold finds with the QED!
From  another QED user today:"Been out and about today testing and comparing against other machines etc in ground that has been horrible in the past.Bround balancing Ive found very simple and easy.'m using the Nokia booster but need a little more sound/threshold.Otherwise no complaints from me, very impressed."
and :"My QED with the 8” commander on it, out performed my SDC Got bits that don't register on my scales SDC has since been sold"
"My QED is terrific. Lightweight, very sensitive and screams at me when it hits any target. The Detect shaft and the 11" ultra sensing coil is a top quality fitout. I attached an external speaker which added under 200gms of weight in total and still remains very well balanced so i never feel fatigued after many hours of swinging."

Stinky  Pete :http://www.detech-metaldetectorsaustralia.com.au/ is the  Australian distributor for the QED.
This is the only forum where you can talk directly with the designer/ manufacturer of the QED and  also some very experienced QED users.
Jrbeatty and Reg Wilson  and  Yellowfin  (or Doug here for that matter!)have NO vested  or pecuniary interests(or secret deals or cash for comment or any other undisclosed benefits )in the QED other than using it to find gold which it is doing very successfully! The ONLY people deriving  an income from the QED(other than finding good gold) are the approved retailer and Bugwhiskers! The ONLY investor in the QED is Bugwhiskers!
I have never met Jrbeatty or Reg Wilson at Howards house or ANY other location!

australian electronic gold prospecting forum.com  |  general detector and coil maintenance  |  Detector and coil maintenence  |  Topic: Repairing a bad coil lead, at the coil end. 0 Members and 2 Guests are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Repairing a bad coil lead, at the coil end.  (Read 6964 times)
Mechanic
regular members
Hero Member
***
Offline Offline

Posts: 936


« on: Friday September 17 2010 22:26:10 AEST PM »

Hi Guys,

Well my coil has still been giving me grief! Damn thing every time the lead is bumped near the coil I get a false noise. This is very annoying. Also sensitivity is down, I found a 0.09g speck using a 15X12" DD commander in mono and could barely hear the same speck with the 11"dd in mono!

So time to bite the bullet and pull the coil apart to cut the bad bit off the coil lead.

The detector sounds off when the lead is wriggled at the strain relief.


Use a good sturdy knife to cut/ break the glue that holds the coil shell together. Work all the way around the coil.


Once all the glue is broken, carefully separate the shell.



Now find the end of the tape around the edge of the coil and carefully remove. A small amount of heat may help to prevent tearing the shield paint off.


Use a hot air gun to remove the bottom shield as it is held on with hot melt glue.


Use a hot air gun to melt the glue and find the end of the coil lead. Do not get things too hot or the foam will melt! Unsolder the coil lead and take note of what wires go where. The wire for the receive coil is very fine so be careful.

Cut the coil lead an inch or so past where the strain relief grabbed the cable and re-solder to the coil windings again. Use only just enough solder. Seal the coil lead join up with hot melt glue back where it originally came from. Test the coil!

Now reassemble the coil. Reuse the tape from the side of the coil. You may need to use some masking tape to help hold it in place. Put the shield wire back where it was and use some conductive silver to guarantee a good connection between the shield wire and the shield paint.

Put some masking tape over the wire to hold it down. Wrap some masking tape around the edge of the coil. Add tape where necessary.

This is the coax for the receive coil and is also for the coil shield. It was completely broken.


This is the wire for the transmit coil. It was holding on by about 10 wires!


Use super glue to glue the coil shell back together. Make sure everything is nice and tight.

I hope this helps some of you take the leap and fix up your old coils. What have you got to loose? Just don't blame me if you do something wrong and hurt your detector!

Cheers Mick

Ps If you want to get rid of an old coil that doesn't work let me know.
Logged
peterlinktech
Guest
« Reply #1 on: Friday September 17 2010 23:18:26 AEST PM »

The strain relief cuts the cable like a knife, it is recommended to leave the strain relief loose so the cable lasts a long time.  It mainly happens to DD coils.
Logged
6666
QED users
Junior Member
*
Offline Offline

Posts: 217


« Reply #2 on: Sunday May 1 2016 14:47:34 AEST PM »

Thanks for showing pictures of the repair, the shield looks like two pieces of paper painted with a graphite paint, then a piece of tape wrapped around the edge and painted with graphite   , when you reapplied the ground wire is it wrapped around the edge and glued down to both sides of the shield paper ?
Logged
Mechanic
regular members
Hero Member
***
Offline Offline

Posts: 936


« Reply #3 on: Sunday May 1 2016 15:54:56 AEST PM »

  
Thanks for showing pictures of the repair, the shield looks like two pieces of paper painted with a graphite paint, then a piece of tape wrapped around the edge and painted with graphite   , when you reapplied the ground wire is it wrapped around the edge and glued down to both sides of the shield paper ?

No, it isn't wrapped around the edge. It is joined to the junction where the shield of the coax connects to the winding, then comes to the top via the same hole the coax goes through, then about 10~15cm along the top toward/past the centre and then goes through the paper and coil to the bottom side of the coil. If it was done on the edge the coil would be prone to falsing when bumped along the edge.

Cheers Mick
Logged
Doug
Administrator
Revered Supreme Hero Member
*******
Offline Offline

Posts: 15647



« Reply #4 on: Sunday May 1 2016 16:28:51 AEST PM »

  
  
Thanks for showing pictures of the repair, the shield looks like two pieces of paper painted with a graphite paint, then a piece of tape wrapped around the edge and painted with graphite   , when you reapplied the ground wire is it wrapped around the edge and glued down to both sides of the shield paper ?

No, it isn't wrapped around the edge. It is joined to the junction where the shield of the coax connects to the winding, then comes to the top via the same hole the coax goes through, then about 10~15cm along the top toward/past the centre and then goes through the paper and coil to the bottom side of the coil. If it was done on the edge the coil would be prone to falsing when bumped along the edge.

Cheers Mick

Thanks mick! happy face
doug smile
Logged

All posts on this forum are the personal views of the author and should  not necessarily be  interpreted as those of Admin The QED contains NO patented or protected IP!!! No fake users on this site! This forum does not depend on  guest posting liars to survive!1/2 wit powerless to login and post! LO
6666
QED users
Junior Member
*
Offline Offline

Posts: 217


« Reply #5 on: Sunday May 1 2016 16:46:29 AEST PM »

  
  
  
Thanks for showing pictures of the repair, the shield looks like two pieces of paper painted with a graphite paint, then a piece of tape wrapped around the edge and painted with graphite   , when you reapplied the ground wire is it wrapped around the edge and glued down to both sides of the shield paper ?

No, it isn't wrapped around the edge. It is joined to the junction where the shield of the coax connects to the winding, then comes to the top via the same hole the coax goes through, then about 10~15cm along the top toward/past the centre and then goes through the paper and coil to the bottom side of the coil. If it was done on the edge the coil would be prone to falsing when bumped along the edge.

Cheers Mick

Thanks mick! happy face
doug smile



Thanks Mick, its just the 8th picture down sorta looks like the ground wire is going around the edge and being glued, but apparently not, thanks.
Logged
Mechanic
regular members
Hero Member
***
Offline Offline

Posts: 936


« Reply #6 on: Sunday May 1 2016 17:48:17 AEST PM »

  
  
  
  
Thanks for showing pictures of the repair, the shield looks like two pieces of paper painted with a graphite paint, then a piece of tape wrapped around the edge and painted with graphite   , when you reapplied the ground wire is it wrapped around the edge and glued down to both sides of the shield paper ?

No, it isn't wrapped around the edge. It is joined to the junction where the shield of the coax connects to the winding, then comes to the top via the same hole the coax goes through, then about 10~15cm along the top toward/past the centre and then goes through the paper and coil to the bottom side of the coil. If it was done on the edge the coil would be prone to falsing when bumped along the edge.

Cheers Mick

Thanks mick! happy face
doug smile



Thanks Mick, its just the 8th picture down sorta looks like the ground wire is going around the edge and being glued, but apparently not, thanks.

Hmmm, looks like that is how that coil was done. But I think it is probably better to do it the way I described above.

Cheers Mick
Logged
6666
QED users
Junior Member
*
Offline Offline

Posts: 217


« Reply #7 on: Tuesday August 22 2017 14:55:21 AEST PM »

What a shame all the pictures are gone.
Logged
Pages: [1] Go Up Print 
australian electronic gold prospecting forum.com  |  general detector and coil maintenance  |  Detector and coil maintenence  |  Topic: Repairing a bad coil lead, at the coil end. « previous next »
Jump to:  


Login with username, password and session length

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2006-2009, Simple Machines
Simple Audio Video Embedder

BisdakworldClassic design by JV PACO-IN
Valid XHTML 1.0! Valid CSS!
gold