northwest F1A4 coil
Welcome, Guest. Please login or register.
Monday March 27 2017 09:48:00 AEDT AM
Home Help Login Register
News: forum firewall bad behaviour Cloudflare Bot scout
Welcome to the Australianelectronicgoldprospectingforum founded in July 2010, an add free totally independent forum with over 70 boards and paid for and managed by the Admin.Total forum Topics:8,664 Total forum Posts:41,150  Members: 639 Total page views:7,742,442 Admin and  forum and domain name owner :marjen at optusnet.com.au. Guests can only see a limited number of boards at present and cannot see any links. Guest cannot post and never will be permitted too!Registration of new members must be approved by admin.Anyone known to have any past or present association with Codan/ML or acting on their behalf as a proxy or intermediary  will not have their registration approved. All  original Photos and posts and  original materials displayed on this site are COPYRIGHTED and remain the property of the poster and the australianelectronicgoldprospectingforum.com. All messages on this forum express the personal views of the author and should not be interpreted as necessarily being in accord with those of the forum owner and neither the owner of this forum and its domain name nor SMF or the forum software developers or the forum host shall be held responsible for the content of any message. Admin reserves the right to remove any offensive or objectionable posts. No defamatory material or politics/religion or issues of race will be permitted.
QED is here! ML have NOT stopped the QED!
Goldsearch Australia has been appointed the Australian Distributor for the QED. QED info on the Goldsearch website has been updated.
This is the only forum where you can talk directly with the designer/ manufacturer of the QED!
Jrbeatty and Reg Wilson  and  Yellowfin have NO vested  or pecuniary interests(or secret deals or cash for comment or any other undisclosed benefits )in the QED other than using it to find gold which it is doing very successfully!
Over the overwhelming majority of typical Gf ground the QED GB works just fine! Another new user has used his QED over "fairly difficult ground around Waanyarra and Kooyoora areas  " and not reported any GB problems!
The so called QED GB problem is just  more fake news created by  some fake, delusional and dishonest imbecile cretins on 1/2 wits (who is a proven forum hacker and liar and  just dumb!) pox, liars and abomination and disgraceful atrocity sewer rats "forum" that have never used a QED! The QED has been used successfully to detect under 300k steel tower transmission lines(try that with a gp/gpx  with a mono coil!!!) so it  can handle bad  EMI! The QED will also run quite and stable in a household with electrical appliances running.Try that with a ML with a mono coil!!! "QED matches and and in most cases outperforms the SDC"  and will thrash it for depth on bigger gold. QED sales are still strong so if you are on the waiting list please be patient as BW is working 12 hours a day to try and reduce the waiting time.
Except for the USB port the prototype QED's are identical in EVERY respect to the production models and according to the designer  the production models may even be  better!
4umer makes another liar a moderator! How low can 4umer go!

australian electronic gold prospecting forum.com  |  Detector Technology and Electronics and new detectors  |  Detector Coils  |  Topic: F1A4 coil 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: F1A4 coil  (Read 754 times)
Alex
Newbie

Offline Offline

Posts: 40


« on: Wednesday December 23 2015 16:33:13 AEDT PM »

hi guys i'm new to this forum  i recently bought a F1A4 metal detector as a starter, i read on one site that the standard coils search pattern is cylindrical pattern different to other monos, how is this done?
Logged
Doug
Administrator
Revered Supreme Hero Member
*******
Online Online

Posts: 15338



« Reply #1 on: Wednesday December 23 2015 19:27:16 AEDT PM »

  
hi guys i'm new to this forum  i recently bought a F1A4 metal detector as a starter, i read on one site that the standard coils search pattern is cylindrical pattern different to other monos, how is this done?
I have not heard this!What site did you read  it on?
doug smile
Logged

All posts on this forum are the personal views of the author and should  not necessarily be  interpreted as those of Admin The QED contains NO patented or protected IP!!! No fake users on this site! This forum does not depend on  guest posting liars to survive!1/2 wit powerless to login and post! LO
Alex
Newbie

Offline Offline

Posts: 40


« Reply #2 on: Wednesday December 23 2015 19:44:26 AEDT PM »

  
Logged
Doug
Administrator
Revered Supreme Hero Member
*******
Online Online

Posts: 15338



« Reply #3 on: Wednesday December 23 2015 20:53:48 AEDT PM »

  
  

As far is i can see the field pattern from the mono will be the same as any other mono's wound in the same way.
doug smile
Logged

All posts on this forum are the personal views of the author and should  not necessarily be  interpreted as those of Admin The QED contains NO patented or protected IP!!! No fake users on this site! This forum does not depend on  guest posting liars to survive!1/2 wit powerless to login and post! LO
Alex
Newbie

Offline Offline

Posts: 40


« Reply #4 on: Wednesday December 23 2015 21:27:48 AEDT PM »

thanks Doug ill try and more info
Logged
authere
invited members
Junior Member
****
Offline Offline

Posts: 333


« Reply #5 on: Thursday December 24 2015 10:49:47 AEDT AM »

Hi Alex,

Turn your machine on and turn it upside down with the bottom of the coil facing upwards, now wave a target over the coil and pass at different heights .

Each pass should give you a different width for a conical detection shape and each pass giving the same width will be a cylindrical detection shape

But if you wave a large object say a coke can over the coil you would get a different detection shape in that it becomes an arc from the centre of the coil

So, the target size required for your experiment would need to be around one gram in size or just use a five cent piece

Cheers, Ron
Logged
Alex
Newbie

Offline Offline

Posts: 40


« Reply #6 on: Friday December 25 2015 18:52:35 AEDT PM »

thanks Ron ;ill give that a go and get back 
Logged
greylourie
invited members
Hero Member
****
Offline Offline

Posts: 511


« Reply #7 on: Friday December 25 2015 21:24:09 AEDT PM »

Download the pdf here:   

Page 93 has test results that show clearly a plot for the stock coil, like Doug says, similar in detection footprint to other mono coils. Conical, not cylindrical.
Page 114 has a plot for the UXO version (timing/coil combo), which is also conical. Some might try to parlay that particular image into a cylindrical shape but it clearly is not.
Logged
Alex
Newbie

Offline Offline

Posts: 40


« Reply #8 on: Friday December 25 2015 22:53:23 AEDT PM »

thanks for that Greylourie explains it well regards alex
Logged
Pages: [1] Go Up Print 
australian electronic gold prospecting forum.com  |  Detector Technology and Electronics and new detectors  |  Detector Coils  |  Topic: F1A4 coil « previous next »
Jump to:  


Login with username, password and session length

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2006-2009, Simple Machines
Simple Audio Video Embedder

BisdakworldClassic design by JV PACO-IN
Valid XHTML 1.0! Valid CSS!
gold