northwest The need for big deep gold detectors.
Welcome, Guest. Please login or register.
Sunday November 17 2019 18:05:45 AEDT PM
Home Help Login Register
News: Welcome to the Australianelectronicgoldprospectingforum founded in July 2010, an add free totally independent forum with over 70 boards and paid for and managed by the Admin.Topics: 9,612  Total forum Posts:47,584 Members:859. Total page views:12,976,190  Admin and  forum and domain name owner :marjen at optusnet.com.au. Guests can only see a limited number of boards at present and cannot see any hot links. Guests cannot post and never will be permitted too!Registration of new members must be approved by admin.
 All  original Photos and posts and  original materials displayed on this site are COPYRIGHTED and remain the property of the poster and the  Austalian electronicgoldprospectingforum.com. All messages on this forum express the personal views of the author and should not be interpreted as necessarily being in accord with those of the forum owner and neither the owner of this forum and its domain name nor SMF or the forum software developers or the forum host shall be held responsible for the content of any message. Admin reserves the right to remove any offensive or objectionable posts. No defamatory material or politics/religion or issues of race will be permitted.
QED news
QED on facebook
link-https://www.facebook.com/groups/245308699667153/403446933853328/?comment_id=403472030517485&reply_comment_id=403476793850342&notif_id=1562580344994993&notif_t=group_comment
Interfacion Pty Ltd is pleased to announce that the QED PI Detector has been modified to allow the use of DD (double D) coils. This change involves a simple change to the electronics within the control box.
The firmware has also been upgraded to include a further improved Ground Balance.
All detectors being delivered to new customers from Monday 5th August 2019 will already have the above upgrades included.
As a show of commitment to all QED owners, the hardware modification to allow use of the DD and CC coils will be provided at no cost.
Of course and as per the QED warranty, the firmware update is provided free of charge, except for P&H.
Any QED owner who plans to attend the Laanecoorie Bash is encouraged to bring their detector along and have it upgraded at no cost.
Standard postage and handling arrangements apply to other owners. Send via Australia Post the box (minus batteries) along with a pre-paid, pre-addressed bag/box to:
Interfacion Pty Ltd
PO Box 106R
Redan VIC 3350
Howard Rockey
Director Interfacion Pty Ltd.

australian electronic gold prospecting forum.com  |  Detector Technology and Electronics and new detectors  |  Detector Coils (Moderator: Goldman)  |  Topic: The need for big deep gold detectors. 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: 1 ... 36 37 38 39 40 41 [42] Go Down Print
Author Topic: The need for big deep gold detectors.  (Read 29368 times)
mylab
invited members
Junior Member
****
Offline Offline

Posts: 201


« Reply #820 on: Thursday January 10 2019 12:53:38 AEDT PM »

It would be interesting on how a large spiral wound DD goes up a against a large spiral wound Concentric and for a fair comparison be the same overall diameter?
Logged
Muntari
invited members
Junior Member
****
Offline Offline

Posts: 414


« Reply #821 on: Thursday January 10 2019 15:15:08 AEDT PM »

"I have been looking for a graphic  I think you published."

Hi 6666, I'll find it and post no probs.

cheers

muntari
Logged

All posts submitted by myself to this forum are my opinion and are done so without prejudice
Muntari
invited members
Junior Member
****
Offline Offline

Posts: 414


« Reply #822 on: Thursday January 10 2019 15:22:51 AEDT PM »

Hi 6666,

Is this the one?

If not,let me know the number of turns and spacing, size etc and I'll draw one up for you, no probs..

cheers

muntari


* Size Spider_Coil TX RX V1.JPG (126.27 KB, 832x837 - viewed 140 times.)
Logged

All posts submitted by myself to this forum are my opinion and are done so without prejudice
Muntari
invited members
Junior Member
****
Offline Offline

Posts: 414


« Reply #823 on: Thursday January 10 2019 16:10:24 AEDT PM »

6666,

here is the other one

cheers

muntari


* Spiral_6666_1.JPG (129.77 KB, 794x771 - viewed 139 times.)
Logged

All posts submitted by myself to this forum are my opinion and are done so without prejudice
6666
QED users
Junior Member
*
Offline Offline

Posts: 398


« Reply #824 on: Thursday January 10 2019 16:15:51 AEDT PM »

  
6666,

here is the other one

cheers

muntari

Thank you this is what I was looking for , much appreciated.
Logged
Muntari
invited members
Junior Member
****
Offline Offline

Posts: 414


« Reply #825 on: Thursday January 10 2019 16:37:40 AEDT PM »

No worries,

Let me know if you need a different template and I'll CAD one up for you

cheers

muntari
Logged

All posts submitted by myself to this forum are my opinion and are done so without prejudice
Muntari
invited members
Junior Member
****
Offline Offline

Posts: 414


« Reply #826 on: Thursday January 10 2019 16:43:47 AEDT PM »

  
It would be interesting on how a large spiral wound DD goes up a against a large spiral wound Concentric and for a fair comparison be the same overall diameter?

Hi Mylab,

Yep, that's in the works too.
One version at same diameter as inner RX, another version at TX size or outer shell size.
Any other ideas let me know and I'll put that on the todo list...

cheers

Muntari
Logged

All posts submitted by myself to this forum are my opinion and are done so without prejudice
mylab
invited members
Junior Member
****
Offline Offline

Posts: 201


« Reply #827 on: Thursday January 10 2019 19:41:17 AEDT PM »

Thanks Muntari.
Look forward to the results.
No other ideas at present.
Logged
6666
QED users
Junior Member
*
Offline Offline

Posts: 398


« Reply #828 on: Friday January 11 2019 06:53:54 AEDT AM »

  
No worries,

Let me know if you need a different template and I'll CAD one up for you

cheers

muntari

For interest do you cad a spiral by hand or is there a template ?
Logged
Muntari
invited members
Junior Member
****
Offline Offline

Posts: 414


« Reply #829 on: Friday January 11 2019 16:48:33 AEDT PM »

  
  
No worries,

Let me know if you need a different template and I'll CAD one up for you

cheers

muntari

For interest do you cad a spiral by hand or is there a template ?

No template just function in the applications
I use SolidWorks or Fusion360 depending on the job I'm asked to do. Both have similar tools. They have  helicoil or spiral functions and you set the diameter, pitch and height plus the material size or diameter. Then number of turns.
Other CAD software probably has a similar function but these are the two I use regularly.
Fusion360 is an online use application with a student version or hobby version available still I think for free. You will need 64bit Windows PC but check it out, its ok.


cheers

Mdtoday
Logged

All posts submitted by myself to this forum are my opinion and are done so without prejudice
6666
QED users
Junior Member
*
Offline Offline

Posts: 398


« Reply #830 on: Friday January 11 2019 21:04:24 AEDT PM »

  
  
  
No worries,

Let me know if you need a different template and I'll CAD one up for you

cheers

muntari

For interest do you cad a spiral by hand or is there a template ?

No template just function in the applications
I use SolidWorks or Fusion360 depending on the job I'm asked to do. Both have similar tools. They have  helicoil or spiral functions and you set the diameter, pitch and height plus the material size or diameter. Then number of turns.
Other CAD software probably has a similar function but these are the two I use regularly.
Fusion360 is an online use application with a student version or hobby version available still I think for free. You will need 64bit Windows PC but check it out, its ok.


cheers

Mdtoday


Thanks I will check them out, cheers.
Logged
geof_junk
QED users
Newbie
*
Offline Offline

Posts: 181



« Reply #831 on: Friday January 11 2019 22:11:08 AEDT PM »

Keep up the good work guys  excited
Logged
Pages: 1 ... 36 37 38 39 40 41 [42] Go Up Print 
australian electronic gold prospecting forum.com  |  Detector Technology and Electronics and new detectors  |  Detector Coils (Moderator: Goldman)  |  Topic: The need for big deep gold detectors. « previous next »
Jump to:  


Login with username, password and session length

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2006-2009, Simple Machines
Simple Audio Video Embedder

BisdakworldClassic design by JV PACO-IN
Valid XHTML 1.0! Valid CSS!