northwest DIY Manual Smd Pick and Place. Very cheap, and beats using tweezers.
Welcome, Guest. Please login or register.
Saturday January 21 2017 05:12:03 AEDT AM
Home Help Login Register
News: forum firewall bad behaviour Cloudflare Bot scout
Welcome to the Australianelectronicgoldprospectingforum founded in July 2010, an add free totally independent forum with over 70 boards and paid for and managed by the Admin.Total forum Topics:8,582 Total forum Posts:40,044 Members: 612 Total page views:7,258,084 Admin and  forum and domain name owner :marjen at optusnet.com.au. Guests can only see a limited number of boards at present and cannot see any links. Guest cannot post and never will be permitted too!Registration of new members must be approved by admin.Anyone known to have any past or present association with Codan/ML or acting on their behalf as a proxy or intermediary  will not have their registration approved. All  original Photos and posts and  original materials displayed on this site are COPYRIGHTED and remain the property of the poster and the australianelectronicgoldprospectingforum.com. All messages on this forum express the personal views of the author and should not be interpreted as necessarily being in accord with those of the forum owner and neither the owner of this forum and its domain name nor SMF or the forum software developers or the forum host shall be held responsible for the content of any message. Admin reserves the right to remove any offensive or objectionable posts. No defamatory material or politics/religion or issues of race will be permitted.
QED coming soon!
Goldsearch Australia has been appointed the Australian Distributor for the QED.Check their website after  Wed 7th Dec 2016.
Global temperature goes from heat record to heat record, yet the sun is at its dimmest for half a century.
What is empirical  evidence?
Empirical evidence is information acquired by observation or experimentation. This data is recorded and analyzed by scientists and is a central process as part of the scientific method. Why is everything posted on climate by Inhere always horseshit?
Poor old  Inhere on finders still does not know the difference between weather and climate!The silly old goat seems to think because some places have recently had very cold weather that this brings into question  AGW!  Only right wing rabble rubbish climate deniers like horseshit Inhere don't  seem to understand  that AGW will mean that some regions of the earth will become colder!
Why is  onehalfgram :1/2 wit always wrong  on the QED?

australian electronic gold prospecting forum.com  |  DIY forum  |  DIY forum  |  Topic: DIY Manual Smd Pick and Place. Very cheap, and beats using tweezers. 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: DIY Manual Smd Pick and Place. Very cheap, and beats using tweezers.  (Read 505 times)
greylourie
invited members
Hero Member
****
Offline Offline

Posts: 505


« on: Tuesday June 10 2014 17:28:20 AEST PM »

Here is an example of a simple pick 'n place setup.   

Its the same guy (LowPowerLabs), that did the solder paste stencils that I linked to in another topic.

The comments are interesting too. Some tips on modifying the airpump intake assembly, to make it work for vacuum as opposed to pressure. Suppose it depends on the make/model you have.
Logged
IBGold
invited members
Junior Member
****
Offline Offline

Posts: 363


IBGold at home.


« Reply #1 on: Wednesday June 11 2014 16:47:45 AEST PM »

Magic I know what my second project for tomorrow is now as I have all the parts to make it how simple and useful it will be thank you  Greylourie.

Regards, Ian. happy face
Logged

Regards, Ian.
IBGold
invited members
Junior Member
****
Offline Offline

Posts: 363


IBGold at home.


« Reply #2 on: Friday June 13 2014 17:17:04 AEST PM »

Hi greylourie,

All done I used the air pump from my circuit board etching tank which is aJarvis Walker bait tank pump battery opperated and already had an external air intake  a rubber spigot with a hole in the side all I did was cut the spigot off where the hole was and insert and super glued a stepped airline conector piece that I cut off a plastic airline joiner the other half was epoxied into the end of the syringe so the pump is now multi purpose and the unit is portable I will look around for a aquarium pump for bench work but for now it works well thanks again.

Regards, Ian. happy face
Logged

Regards, Ian.
greylourie
invited members
Hero Member
****
Offline Offline

Posts: 505


« Reply #3 on: Saturday June 14 2014 01:06:08 AEST AM »

Thats brilliant, Ian. Multi-use pump.
Logged
Ronk
Newbie

Offline Offline

Posts: 31


« Reply #4 on: Monday November 3 2014 23:02:44 AEDT PM »

  
Thats brilliant, Ian. Multi-use pump.

I build electronics on a daily basis and I have been wondering how they did surface mount pcb   now i know and might try some out in the near future 
Logged
Pages: [1] Go Up Print 
australian electronic gold prospecting forum.com  |  DIY forum  |  DIY forum  |  Topic: DIY Manual Smd Pick and Place. Very cheap, and beats using tweezers. « previous next »
Jump to:  


Login with username, password and session length

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2006-2009, Simple Machines
Simple Audio Video Embedder

BisdakworldClassic design by JV PACO-IN
Valid XHTML 1.0! Valid CSS!