northwest Updated QED users manual
Welcome, Guest. Please login or register.
Sunday April 5 2020 13:46:53 AEST PM
Home Help Login Register
News: Welcome to the Australianelectronicgoldprospectingforum founded in July 2010, an add free totally independent forum with over 70 boards and paid for and managed by the Admin.Topics: 9,612  Total forum Posts:47,584 Members:885. Total page views:12,976,190  Admin and  forum and domain name owner :marjen at optusnet.com.au. Guests can only see a limited number of boards at present and cannot see any hot links. Guests cannot post and never will be permitted too!Registration of new members must be approved by admin.
 All  original Photos and posts and  original materials displayed on this site are COPYRIGHTED and remain the property of the poster and the  Austalian electronicgoldprospectingforum.com. All messages on this forum express the personal views of the author and should not be interpreted as necessarily being in accord with those of the forum owner and neither the owner of this forum and its domain name nor SMF or the forum software developers or the forum host shall be held responsible for the content of any message. Admin reserves the right to remove any offensive or objectionable posts. No defamatory material or politics/religion or issues of race will be permitted.
Admin:Doug Moderators:Goldman and Bugwhiskers

Corona virus :Coronavirus: Government declares human biosecurity emergency
An immediate ban restricting non-essential indoor gatherings to 100 people or less is imposed across the country.Only 1 person per 4 sq meters now allowed.Non essential travel should cease immediately.
Victorian Government to provide emergency food for those isolated due to coronavirus
Cash for small businesses and loans guaranteed in $66b coronavirus stimulus package.  Victoria and NSW to push for full community lockdowns amid COVID-19 pandemic.The NSW Government will proceed to a more comprehensive shut down of non-essential services over the next 48 hours, as Victoria pushes for schools to be shut down from Tuesday.SA's borders will be closed and 12 border crossings will be established. Anyone arriving from Tuesday at 4:00pm in the state will be required to self-isolate for two weeks. Both the NSW and Victoria state governments will begin to shut down all non-essential services over the next 48 hours. School holidays in Victoria will be brought forward to start on Tuesday.Western Australia, South Australia to close borders in response to coronavirus pandemic. AFL suspends season until until May 31 in response to coronavirus
 Prime Minister Scott Morrison says as of midday tomorrow clubs, pubs, gyms, places of worship, cinemas, casinos and licensed areas of hotels will close, while restaurants and cafes will be takeaway-only.
  
link-https://www.abc.net.au/news/2020-03-24/coronavirus-press-conference-in-full-gladys-berejiklian/12083986
Tokyo Olympics will be postponed to 2021 due to coronavirus outbreak, says IOC member Dick Pound
Coronavirus sees pharmacies run out of critical medication, endangering the lives of people with chronic illnesses.
PM's latest press conference
Prime Minister Scott Morrison announces a host of new measures and restrictions aimed at slowing the spread of coronavirus, including limiting the number of people who can attend a funeral to 10.
  
link-https://www.abc.net.au/news/2020-03-24/coronavirus-australia-live-news-covid-19-latest/12083914
It's up to you: data shows coronavirus can only be controlled if eight out of 10 Aussies stay home.
Prime Minister Scott Morrison says non-urgent elective surgeries in public and private hospitals will be banned from midnight.
Top 50 coronavirus shutdown questions answered
  
link-https://www.heraldsun.com.au/news/victoria/top-50-coronavirus-shutdown-questions-answered/news-story/a6a5acd3662c0b54ade7ccf5c7b8ecbb
Forced coronavirus quarantine for all people returning to Australia

Other forum news
  
link-http://onehalfgram.freeforums.net/
In accordance with Section 25(a) of the ProBoards Terms of Service, this forum has been taken offline.
Onehalfgram  i win you lose! Your latest  delusional post/lies on finders forum shows why you are not a fit and proper  person to run a forum!  Proboards shut you down  for persistent  violations of its terms of service! Onehalfgram is you persist in posting lies and libel on finders then the loss of your forum may be the least of your worries!

australian electronic gold prospecting forum.com  |  Common interest forum.  |  General chat and discussion forum (Moderator: bugwhiskers)  |  Topic: Updated QED users manual 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Updated QED users manual  (Read 1113 times)
Doug
Administrator
Revered Supreme Hero Member
*******
Online Online

Posts: 17082



« on: Thursday August 3 2017 14:39:12 AEST PM »

Updated QED users manual
doug smile

* QED Revision 4 Owners Manual pdf .pdf (650.02 KB - downloaded 158 times.)
Logged

I had one halfgram free forum shut down for persistent  violations of proboards TOS. So suck it up llanbric! My "pseudo legal claptrap" to pro boards worked groinrash so suck it up too!!!
jrbeatty
invited members
Newbie
****
Offline Offline

Posts: 133



« Reply #1 on: Thursday August 3 2017 14:51:00 AEST PM »

That download doesn't seem to have the latest extended menu with SMR, etc?
Logged
Doug
Administrator
Revered Supreme Hero Member
*******
Online Online

Posts: 17082



« Reply #2 on: Thursday August 3 2017 15:14:10 AEST PM »

  
That download doesn't seem to have the latest extended menu with SMR, etc?
I have uploaded the wrong manual! sorry Here is the correct one.
doug smile

* QED Revision 4.pdf (720.54 KB - downloaded 249 times.)
Logged

I had one halfgram free forum shut down for persistent  violations of proboards TOS. So suck it up llanbric! My "pseudo legal claptrap" to pro boards worked groinrash so suck it up too!!!
jrbeatty
invited members
Newbie
****
Offline Offline

Posts: 133



« Reply #3 on: Thursday August 3 2017 15:58:18 AEST PM »

Not a problem!  smile
Logged
6666
QED users
Junior Member
*
Offline Offline

Posts: 401


« Reply #4 on: Thursday August 3 2017 17:21:04 AEST PM »

Thanks
Logged
WayupNorth
QED users
Newbie
*
Offline Offline

Posts: 4


« Reply #5 on: Friday August 18 2017 19:30:19 AEST PM »

Thanks, I will have a good read of the manual so when the unit arrives i will have a fair idea of the controls.
Logged
Doug
Administrator
Revered Supreme Hero Member
*******
Online Online

Posts: 17082



« Reply #6 on: Friday August 18 2017 21:07:40 AEST PM »

  
Thanks, I will have a good read of the manual so when the unit arrives i will have a fair idea of the controls.

I have added  you to the QED users group so that you can read about their experience and tips from using the QED.
doug smile
Logged

I had one halfgram free forum shut down for persistent  violations of proboards TOS. So suck it up llanbric! My "pseudo legal claptrap" to pro boards worked groinrash so suck it up too!!!
mylab
invited members
Junior Member
****
Offline Offline

Posts: 207


« Reply #7 on: Saturday September 2 2017 10:24:55 AEST AM »

  
  
That download doesn't seem to have the latest extended menu with SMR, etc?
I have uploaded the wrong manual! sorry Here is the correct one.
doug smile

Having another read through the latest manual that Doug says is the correct one then under MENU CONTROLS :: THRESHOLD B - BIAS I see this - Note: BIAS can change slightly overtime depending on temperature.  

Wasn't this temperature drift problem fixed in one of the  latest QED updates?

Maybe there is another manual than the one Doug says is the correct one?
Logged
Doug
Administrator
Revered Supreme Hero Member
*******
Online Online

Posts: 17082



« Reply #8 on: Monday September 4 2017 09:27:16 AEST AM »

  
Wasn't this temperature drift problem fixed in one of the  latest QED updates?


Yes, one  circuit component  is replaced in the update  and all  detectors currently being sold.It almost totally eliminates any temp drift in the bias.
doug smile
Logged

I had one halfgram free forum shut down for persistent  violations of proboards TOS. So suck it up llanbric! My "pseudo legal claptrap" to pro boards worked groinrash so suck it up too!!!
Doug
Administrator
Revered Supreme Hero Member
*******
Online Online

Posts: 17082



« Reply #9 on: Monday September 4 2017 09:29:44 AEST AM »

  
  
Wasn't this temperature drift problem fixed in one of the  latest QED updates?


Yes, one  circuit component  is replaced in the update  and all  detectors currently being sold.It almost totally eliminates any temp drift in the bias.
doug smile

The component that  has been replaced  has a temp coefficient of 30ppm / deg C which is the best that you can currently get.
doug smile
Logged

I had one halfgram free forum shut down for persistent  violations of proboards TOS. So suck it up llanbric! My "pseudo legal claptrap" to pro boards worked groinrash so suck it up too!!!
mylab
invited members
Junior Member
****
Offline Offline

Posts: 207


« Reply #10 on: Monday September 4 2017 10:05:17 AEST AM »

Okay thanks Doug.
Logged
Pages: [1] Go Up Print 
australian electronic gold prospecting forum.com  |  Common interest forum.  |  General chat and discussion forum (Moderator: bugwhiskers)  |  Topic: Updated QED users manual « previous next »
Jump to:  


Login with username, password and session length

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2006-2009, Simple Machines
Simple Audio Video Embedder

BisdakworldClassic design by JV PACO-IN
Valid XHTML 1.0! Valid CSS!